Whale | Table Lamp

3D MODEL DESCRIPTION
 

Ocean-inspired lighting that’s making waves
 

• This STL file is recommended for FDM Printers!
• 3D Printing Time Based on Ender 3: 13 Hours, 41 Minutes (will vary accord to you printer model)
• Approximately Height: 22 cm
   
• You Will Need To: RGB LED Board 5V - AliExpress and AliExpress
   
• Alternative Options: WIRED - RGB - REMOTE CONTROL - AliExpress
                                      CABLE - Amazon
                                      LED BOARD - Amazon and Amazon
                                      BATTERY ONLY - Amazon 
   

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
 

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.20 mm
• Recommended Layer Height:  0.20 mm
• Recommended Perimeters/ Walls: 2. in “Body-Files” and 3 Walls in “Base-Files”
• Recommended Infill (%): None, you will need 10% (Gyroid) only in “Base-Files”
• Needs Support: No.
• Build Plate Adhesion: None.
   

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!