Ir directamente a la información del producto
1 de 5

Foundry 3D

Sticky Match | Controller Holder

Sticky Match | Controller Holder

Precio habitual $29.99 USD
Precio habitual Precio de oferta $29.99 USD
Oferta Agotado

General model's info

3D MODEL DESCRIPTION
 

This helps with that game you’re so obsessed about you can’t put your controller down. 
 

  • This STL file is recommended for FDM Printers!
  • 3D Printing Time Based on Ender 3:  XBOX 11 hour  03 minutes,  PS5 12 Hours  43 Minutes (will vary accord to you printer model)
  • Approximately Height:  XBOX 6,5 cm,  PS5 7,4 cm
     

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

 

  • Line Width/ Nozzle: 0.4 mm
  • First Layer Line Width: 0.48 mm / 120%
  • Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
  • Recommended Initial Layer Height:  0.16 mm
  • Recommended Layer Height:  0.16 mm
  • Recommended Perimeters/ Walls: 3.
  • Recommended Infill (%): 10% (Gyroid)
  • Needs Support: No
  • Build Plate Adhesion: Skirt.

 

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!

Ver todos los detalles