Race On: Track 2

3D MODEL DESCRIPTION
 

This track is all about precision! What good is speed if you can’t navigate the obstacles?

• This STL file is recommended for FDM Printers!
• 3D Printing Time Based on Ender 3: 04 Day, 23 Hours, 03 Minutes (will vary accord to you printer model)
• Approximately Length: 100 cm
   

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
 

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.
   

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!