Marble Run Track 3

3D MODEL DESCRIPTION
 

Ready to take on the challenge? Our Level 3 track is a wild ride!
 

• This STL file is recommended for FDM Printers!
• 3D Printing Time Based on Ender 3: 08 Days 22 Hours 43 Minutes (will vary accord to you printer model)
   

Assembly Note: Please read the assembly manual for the exact number of each part to print and detailed instructions on how to assemble the tracks. This will help you get everything right from the start!
 

Suggestions Links

Glass Marbles Balls 16mm Amazon Aliexpress Mercado Livre
 

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.2 mm
• Recommended Layer Height:  0.2 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 10% (Gyroid)
• Needs Support: No.
• Build Plate Adhesion: No.
•  

The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!