3D MODEL DESCRIPTION
It’s vase mode time once again!
This collaboration with Kowafatcompany is all about expressions. Try it in vase mode, stack them together to build totems or explore the different visual effects you can create with different filament choices. Express yourself!
- This STL file is recommended for FDM Printers!
- 3D Printing Time: 12 Hours 58 Minutes
- Approximately Height: 9,6 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Nozzle: 0.4 mm
- Line Width: 0.6 mm
- Average Speed: 20mm/s (First Layer) / 20mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: Vase Mode (1 Perimeter).
- Needs Support: No.
- Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
