3D MODEL DESCRIPTION
A modern take on decorating your home.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 4 Hours 50 Minutes (will vary accord to you printer model)
-
Approximately Height: 23,5 cm
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Nozzle: 0.4 mm
- Line Width: 0.6 mm
- Average Speed: 20mm/s (First Layer) / 20mm/s (All the other layers)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: Vase Mode (1 Perimeter).
- Needs Support: No.
-
Build Plate Adhesion: Skirt.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
