3D MODEL DESCRIPTION
The coziest companion for your hibernation station.
- This STL file is recommended for FDM Printers!
- 3D Printing Time Based on Ender 3: 09 Hours, 38 Minutes (will vary accord to you printer model)
-
Approximately Height: 15 cm
-
You Will Need To: RGB LED Board 5V - AliExpress and AliExpress
-
Alternative Options: WIRED - RGB - REMOTE CONTROL - AliExpress
CABLE - Amazon
LED BOARD - Amazon and Amazon
BATTERY ONLY - Amazon
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
- Line Width/ Nozzle: 0.4 mm
- First Layer Line Width: 0.48 mm / 120%
- Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
- Recommended Initial Layer Height: 0.20 mm
- Recommended Layer Height: 0.20 mm
- Recommended Perimeters/ Walls: 2. in “Body-Files” and 3 Walls in “Base-Files”
- Recommended Infill (%): None, you will need 10% (Gyroid) only in “Base-Files”
- Needs Support: No.
-
Build Plate Adhesion: None.
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.
Happy Printing!
